Harvia Cilindro 6 kW Electric Sauna Heater
Harvia Cilindro 6 kW Electric Sauna Heater
Couldn't load pickup availability
The Harvia Cilindro 6 kW Electric Sauna Heater is a stylish, pillar-style heater designed for sauna rooms between 141 and 294 cubic feet (4–8.3 m³). Its partially open front casing lets heat radiate smoothly from its large stone surface, delivering powerful, even warmth while maintaining a slim footprint.
With an impressive 198 lb (90 kg) stone capacity, the Cilindro creates soft, gentle heat and lets you tailor your steam experience — pour water directly into the center for a milder steam or onto the top stones for an invigorating, sharper burst. Its versatile design allows it to be installed freestanding, against a wall, in a corner, or even recessed into a lower bench for a clean, modern sauna look.
This model is Wi-Fi compatible and requires the Harvia Xenio CX30-U1-U3-XW digital control unit (sold separately) for operation. The splash-proof external control panel can be mounted inside or outside the sauna and offers remote operation via the MyHarvia mobile app for ultimate convenience.
⚠️ Control unit and sauna stones sold separately.
To operate this heater, the Harvia Xenio CX30-U1-U3-XW controller is required.
Features:
-
Large interior stone cavity for authentic Finnish steam
-
Flexible installation: freestanding, wall-adjacent, corner, or embedded in a bench
-
Premium stainless steel construction inside and out
-
Slim, modern pillar design
-
Made in Finland
-
Certification: ETL Listed (CSA & UL)
-
Warranty: Up to 3 years residential (2 years standard + 1 year with registration)
Specifications:
-
Model: HPCS6U1H
-
Recommended Sauna Room Size: 141–294 ft³ (4–8.3 m³)
-
Stone Capacity: 198 lb (90 kg), Ø 5–10 cm
-
Dimensions: 14″ W × 13″ D × 40″ H (360 × 340 × 1010 mm)
-
Electrical Requirements:
-
Voltage: 240 V, 1-phase
-
Breaker: 30 A double pole
-
Wire: 10 AWG copper with 90 °C insulation
-
Disclaimer: ELU Saunas and Cold Tubs is not responsible for any electrical work. Installation must be performed by a licensed electrician in accordance with local electrical codes and the manufacturer’s installation manual.







